Weider WESY29510 user manual

25.Wrap the Short Cable (42) around a 3 1/2” Pulley (45). Attach the Pulley and a Cable Trap (44) to the upper hole in the Press Frame (13) with a 3/8” x 3 1/2” Bolt (69), a 3/8” Washer (86), and a 3/8” Nylon Locknut (84). Be sure that the Cable

Trap is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown.

26.Wrap the Short Cable (42) around a 3 1/2” Pulley (45). Attach the Pulley and a Cable Trap (44) to the upper hole in the Front Upright (4) with a 3/8” x 3 3/4” Bolt (70), a 3/8” Washer (86), and a 3/8” Nylon Jamnut (92). Be sure that the Cable Trap is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown.

27.Have a second person lift the Top Weight (24) off the stack of Weights (22). Attach the end of the Short Cable (42) to the Long “U”-Bracket (50) with a 1/4” Nylon Locknut (82) and a 1/4” Washer (81). See the inset drawing. Do not overtighten the Nylon Locknut; it should be threaded onto the end of the Cable so only two threads are showing above the Nylon Locknut.

25
42
84
45
44
	86
	69
	13
26
	4
70	86
	44
	45 92
	42
27
	50	82
		81
42
		24
		22
		82
	50	42
13