10.Lubricate both axles on the Top Frame (10).
Slide the Right Arm (12) onto the right axle on the Top Frame (10). Note: Be careful not to con- fuse the Right Arm with the Left Arm (11); refer to step 9 to identify the Right Arm. Be sure that the upper end of the Right Arm is behind the indicated bracket on the Top Frame.
Place two 1” Retainers (48) on top of a 1” Round Cover Cap (49), as shown in the inset drawing.
Be sure that the teeth on the Retainers bend toward the Cover Cap. Tap the Cover Cap and Retainers onto the right axle.
Attach the Left Arm (11) in the same manner.
11.Press four 1 1/2” x 2” Inner Caps (52) into the ends of the Punching Bag Arm (6) and the Speed Bag Arm (7).
Attach a 3/8” x 2” Eyebolt (64) to the Punching Bag Arm (6) with two 3/8” Washers (86) and a 3/8” Nylon Locknut (84).
12.Attach the Speed Bag Board (33) to the Speed Bag Arm (7) with four 3/8” x 1” Bolts (89) and four 3/8” Nylon Jamnuts (92).
10 | Bracket | 10 |
|
|
| ||
|
|
| |
| Lubricate |
|
|
| Axle |
|
|
| 12 |
|
|
| 48 |
| |
| 49 |
| 11 |
|
|
| |
10 |
|
|
|
| 48 |
|
|
| 49 |
|
|
11 | 84 |
|
|
|
|
| |
| 86 |
|
|
52 |
|
| |
| 86 |
|
|
| 64 |
|
|
| 6 |
|
|
|
|
| 7 |
|
|
| 52 |
| 52 |
|
|
| 52 |
|
|
12 | 92 |
|
|
|
|
| |
| 7 |
| 33 |
|
|
| |
| 89 | 89 |
|
|
|
| |
9
