Weider WESY39523 user manual Tighten all of the M10 Nylon Locknuts 87 used in steps

12.Attach the Top Frame (6) between the Squat Upright

(4) and the Swivel Upright (5) with four M10 x 95mm Bolts (92), the two Short Frame Plates (52), and two M10 Nylon Locknuts (87) as shown. Do not tighten the Bolts and Locknuts yet.

Attach the four Weight Guides (42) to the Top Frame

(6)with two M10 x 165mm Bolts (30) and two M10 Nylon Locknuts (87).

13.Press two 50mm x 75mm Inner Caps (58) into the Top Frame (6) and the Butterfly Top Frame (7).

Attach the Butterfly Top Frame (7) to the Top Frame

(6)with two M10 x 70mm Bolts (85), two M10

Washers (91), and two M10 Nylon Locknuts (87).

Do not tighten the Locknuts yet.

Attach the Butterfly Top Frame (7) to the Butterfly Upright (3) with two M10 x 95mm Bolts (92), two M10 Washers (91), and two M10 Nylon Locknuts (87).

Tighten all of the M10 Nylon Locknuts (87) used in steps 4–13.

ARM ASSEMBLY

14.Open the parts bag labeled “ARM ASSEMBLY.”

Press three 40mm x 50mm Inner Caps (21) into the Leg Lever (10).

Lubricate an M10 x 65mm Bolt (18) with grease. Turn the Leg Lever (10) so that the welded tab is on the indicated side, and attach the Leg Lever to the Seat Upright (9) with the Bolt and an M10 Nylon Locknut (87). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily.

15.Press a 50mm x 70mm Inner Cap (95) into the Butterfly Frame (47). Attach the tethers on the two “L”-pins w/Tether (60) to the Butterfly Frame with an M4 x 20mm Self-tapping Screw (14).

Lubricate an M10 x 80mm Bolt (107) with grease. Attach the Butterfly Frame (47) to the Butterfly Top Frame (7) with the Bolt and an M10 Nylon Locknut (87). Do not overtighten the Nylon Locknut; the

Butterfly Frame must be able to pivot easily.

10

12
				6
92	52	87
			87
			87
	5		42
30				87	52
			30			92
					4
13		92
				91
	7				58
				6
		85		91		87
58						91
				87
				3
14			87	9
		21
				Lubricate
	21	10	Tab		18
				21
15			7
		95
		87	107—Lubricate
				14
		60		60
		47