Weider WESY39523 specification

44.Wrap the Swivel Low Cable (72) over a 90mm Pulley (78). Attach the Pulley to the Offset Double “U”-bracket (61) with an M10 x 45mm Bolt (93) and an M10 Nylon Locknut (87).

45.Wrap the Swivel Low Cable (72) under a 90mm Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (101) with an M10 x 45mm Bolt (93) and an M10 Nylon Locknut (87).

46.Route the Swivel Low Cable (72) under the indicat- ed stack of Weights (44).

Wrap the Swivel Low Cable (72) under a 90mm Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (101) with an M10 x 45mm Bolt (93) and an M10 Nylon Locknut (87).

47.Wrap the Swivel Low Cable (72) over a 90mm Pulley (78). Attach the Pulley and a Cable Trap (68) between the indicated holes in the Pulley Plates (63) with an M10 x 50mm Bolt (100) and an M10 Nylon Locknut (87). Make sure that the Cable

Trap is turned to hold the Cable in the groove of the Pulley.

48.Wrap the Swivel Low Cable (72) under a 90mm Pulley (78). Attach the Pulley to the indicated brack- et on the Short Base (2) with an M10 x 45mm Bolt (93) and an M10 Nylon Locknut (87).

44
93		87
	61
		78
		72
45
	72
		78
101		87
101
93
46
78		72
78
		87
44		101
93
47
100		63
100
68		87
		78
		72
48
	78
		72
	87	93
	87
2

Weider WESY39523 user manual Trap is turned to hold the Cable in the groove of the Pulley

Models: WESY39523

Trap is turned to hold the Cable in the groove of the Pulley.

44
93		87
	61
		78
		72
45
	72
		78
101		87
101
93
46
78		72
78
		87
44		101
93
47
100		63
100
68		87
		78
		72
48
	78
		72
	87	93
	87
2

44
93		87
	61
		78
		72
45
	72
		78
101		87
101
93
46
78		72
78
		87
44		101
93
47
100		63
100
68		87
		78
		72
48
	78
		72
	87	93
	87
2

44
93		87
	61
		78
		72
45
	72
		78
101		87
101
93
46
78		72
78
		87
44		101
93
47
100		63
100
68		87
		78
		72
48
	78
		72
	87	93
	87
2