19.Route the Swivel High Cable (74) through the Swivel Upright (5) and over a 115mm Pulley (119). Attach the Pulley inside the Upright with an M10 x 65mm Bolt (18), two M10 Washers (91), two 12mm Spacers (89), and an M10 Nylon Locknut (87).

Attach an M10 x 65mm Bolt (18), two M10 Washers (91), and an M10 Nylon Locknut (87) to the Swivel Upright (5).

20.Remove the preattached 90mm Pulleys (78) from the Small Pulley Plates (31).

Wrap the Swivel High Cable (74) over a 90mm Pulley (78). Attach the Pulley and a Cable Trap (68) to the second set of holes from the top of the Small Pulley Plates (31) with an M10 x 50mm Bolt (100) and an M10 Nylon Locknut (87). Make sure the

Cable Trap is turned to hold the Cable in the groove of the Pulley.

21.Wrap the Swivel High Cable (74) over a 115mm Pulley (119). Attach the Pulley inside of the indicat- ed bracket on the Top Frame (6) with M10 x 45mm Bolt (93) and an M10 Nylon Locknut (87).

22.Lift the Weight Tube (43) and the Top Weight (45) closest to the Swivel Upright (5). Make sure that the small pin on the Weight Tube is inside of the groove under the Top Weight.

Insert a Weight Pin (50) into the stack of Weights (44). Place a 50mm Washer (1) on top of the Weight Tube (43). Tighten an M12 Nut (118) halfway onto the end of the Swivel High Cable (74). Screw the end of the Cable two full turns into the Weight Tube. Then, tighten the M12 Nut against the Washer.

23.Locate the Swivel Cable (17), which is 2930mm long and has an eyelet on each end. Attach the Cable inside the Top Frame (6) with an M10 x 65mm Bolt (18), two M10 Washers (91), and an M10 Nylon Locknut (87).

12

19

 

 

91

18

 

5

 

 

 

 

18

 

 

 

 

91

 

 

91

87

 

 

 

 

 

 

89

 

 

 

 

91

 

 

 

74

 

 

 

 

87

89

119

 

 

 

 

20

 

 

 

 

 

74

 

 

 

 

87

 

 

 

 

 

 

100

 

78

68

31

 

31

 

 

 

21

 

 

 

 

 

 

 

 

6

93

 

 

 

 

 

 

 

87

 

119

74

22

 

 

 

 

 

 

 

74

5

 

 

118

 

 

 

50

45

 

 

1

 

 

 

 

 

 

43

 

 

 

 

 

 

 

 

44

23

 

 

 

 

18

 

87

 

 

91

17

 

 

 

 

 

 

6

 

Page 12
Image 12
Weider WESY39523 user manual 119 100 118