29.Wrap the Lat Cable (88) around a 90mm Pulley
(78).Attach the Pulley and a Long Cable Trap (102) to the Top Frame (6) with an M10 x 50mm Bolt
(100)and an M10 Nylon Locknut (87). Make sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.
30.Remove the preattached 90mm Pulleys (78) from the Pulley Plates (63).
Wrap the Lat Cable (88) around a 90mm Pulley
(78).Attach the Pulley and a Cable Trap (68) to the second set of holes from the top of the Pulley Plates (63) with an M10 x 50mm Bolt (100) and an M10 Nylon Locknut (87). Make sure the Cable
Trap is turned to hold the Cable in the groove of the Pulley.
31.Attach the end of the Lat Cable (88) inside of the Butterfly Top Frame (7) with an M10 x 65mm Bolt (18), two M10 Washers (91), and an M10 Nylon Locknut (87).
32.Locate the Butterfly Cable (69), which is the shortest Cable. Attach the Cable to the Pivot Bracket (70) on the Left Butterfly Arm (25) with an M8 x 20mm Shoulder Bolt (103) and an M8 Nylon Locknut (34).
33.Wrap the Butterfly Cable (69) over a
Trap is turned to hold the Cable in the groove of the Pulley.
14
29 |
|
| 88 | 78 |
|
| 87 | ||
|
|
|
| |
|
|
|
| 102 |
|
|
|
| 100 |
|
|
|
| 6 |
30 |
|
|
|
|
| 100 |
|
| |
|
| 68 | 78 |
|
|
|
|
| |
|
|
|
| 87 |
|
| 88 |
| |
|
| 63 |
|
|
31 | 87 | 91 |
| |
|
|
|
| 91 |
|
|
|
| 18 |
|
| 7 |
|
|
|
| 88 |
|
|
32 |
|
|
|
|
|
| 34 |
| |
|
|
|
| 69 |
|
|
| 70 | 103 |
|
|
|
| |
|
|
| 25 |
|
33 |
|
|
|
|
|
| 3 |
|
|
|
| 87 | 55 |
|
|
|
| 102 | |
|
|
|
| 59 |
|
| 69 |
|
|