WESY85201 R1096A

REMOVE THIS PART IDENTIFICATION

CHART FROM THE MANUAL!

This chart is provided to help you identify the small parts used in assembly.			Important: Some p	arts may
have been p	re-assembled for shipping purposes; if you cannot find a part in the parts bags, check to
see if it has been p		re-assembled.

Please Note: The assembly is divided into four stages: 1) frame assembly, 2) press and butterfly

arm assembly, 3) cable and pulley assembly, and 4) seat and backrest assembly. The hardware for each stage is packaged separately. Wait until you begin each assembly stage to open that parts bag.

Page 21

Image 21

Weider user manual Remove this Part Identification Chart from the Manual, WESY85201 R1096A

Contents

Model No. WESY85201 Serial No QUESTIONS?Customer HOT Line Mon.-Fri., 6 a.m.-6 p.m. MST Limited Warranty Table of Contents Important Precautions Ing downMake sure that the cables remain on the pul Before YOU Begin Using the Weider Assembly, use the Part Identification AssemblyFollowing Tools not Included are Required for Assembly Not tighten the Nylon Locknuts yet Frame Assembly Each Carriage BoltTighten all Nylon Locknuts used in steps 1 through Shown Frame Assembly ARM Assembly On each Arm. Arm identification is very important for step Attach a V-Pulley 6 and a Long Cable TrapAttach the Left Arm 47 in the same manner Tighten all Nylon Locknuts used in this step now Nylon Locknuts until the end of this assembly step Locate the Long Cable Cable AssemblyA 3/8 Nylon Locknut Cable in place 3/8 x 2 1/2 Bolt 7 and the 3/8 Nylon Locknut not shown Pulley 6 on the Right Arm Be sureBracket. Note This may come pre-assem- bled For easy part identification 3/8 x 3 1/2 Bolt 16 Locate the Short Cable RouteFront Upright Trap 66 is turned to hold the Cable Tighten the 3/8 Nylon Locknut 21 and the 3/8 x 3 1/2 Bolt Cable Assembly Seat Assembly A 1/4 Flat Washer 10. Do not comSeat Plate to the Seat 13 with two 1/4 x 1/2 Screws Seat Assembly Decal Placement Insert the L-Pin 40 through the holes8520 Changing the Weight Setting AdjustmentAmount of resistance at each weight station Attaching the LAT BAR or Nylon Strap to High Pulley Station Locking the LEG Lever Weight Resistance Chart Tightening the Cables TROUBLE-SHOOTING and MaintenanceWoven cable, the type of cable used on the home That the Cable and Pulley move smoothly Cable traps do not touch or bind the cables Long Cable Cable DiagramShort Cable Be sure that Part No R1096A Ordering Replacement Parts WESY85201 R1096A Remove this Part Identification Chart from the Manual Parafusode5/16x13/4 Clipe do Cabo Espaçador de 1/2 x 3/4 61-2 Remove this Part LIST/EXPLODED Drawing from the Manual Qty Description Part LIST-Model No. WESY85201 R1096A

REMOVE THIS PART IDENTIFICATION

CHART FROM THE MANUAL!

have been p

WESY85201 R1096A