Weider WESY85201 user manual Nylon Locknuts until the end of this assembly step

ARM ASSEMBLY

11.Press a 1 3/4” Square Inner Cap (44) into the Seat Frame (36). Attach a Bumper (73) to the Seat Frame with a 1/2” Tap Screw (65).

Slide the Seat Frame (36) onto the 5/16” x
2 1/2” Carriage Bolts (1) in the Base (4).		See
the inset drawing. The bracket on the Seat
Frame must be behind the Press Frame
(17)Hand. -tighten a 5/16” Nylon Locknut (3)
onto each Carriage Bolt.	Do not tighten the

Nylon Locknuts until the end of this assembly step.

Attach the Seat Frame (36) to the Front

Upright (42) with two 5/16” x 2 3/4” Bolts (11), two 5/16” Flat Washers (8), and two 5/16”

Nylon Locknuts (3).

Tighten all Nylon Locknuts used in this step now.

12.Attach a Bumper (73) to the Rocker Arm (32) with a 1/2” Tap Screw (65).

Lubricate a 3/8” x 3 1/4” Bolt (35). Attach the Rocker arm (32) to the Base (4) with the 3/8”

x 3 1/4” Bolt and a 3/8” Nylon Locknut (21).

13.Lubricate a 3/8” x 2 1/2” Bolt (7). Attach the Leg Lever (29) to the Rocker Arm (32) with

the 3/8” x 2 1/2” Bolt and a 3/8” Nylon Jam Nut (33).

Press a 1 3/4” Square Inner Cap (44) into each end of the Leg Lever (29).

11
	Bracket	36
	17
42
3
8		44
11
		73
	36	65
		3
4	1
12
	73
	65
	32
		21
		4
Lubricate—35
13
	44
	32
		7—Lubricate
	33
		29
		44

9