Install Packaged and Non-Packaged Boiler

Install burner (also refer to instructions packed with burner):

Burners designed for use with Weil-McLain 68 boilers must not be

used on GOLD Oil boilers. Contact individual burner manufacturers for GOLD Oil applications.

For P-SGOand A-SGOboiler:

1.Secure universal mounting flange and gasket to burner mounting door. Use three bolts provided.

2.Secure burner on flange with three bolts.

3.Position burner so end of air tube is level to 1½° tilt down toward chamber. Open door to verify burner position. End of air tube should be flush to ¼" recessed from inside wall of burner door refractory. Check for secure placement of insulation on target wall, chamber floor and burner mounting door. Securely close door.

Page 10
Image 10
Weil-McLain 550-141-829/1201 manual Install Packaged and Non-Packaged Boiler