TROUBLESHOOTING GUIDE (continued)

PROBLEM

POSSIBLE CAUSE

 

SOLUTION

 

 

 

 

10. Collapsed while

-May be caused from baking in high altitude.

 

-Make recommended adjustment for high altitude

baking

 

 

baking by reducing yeast by ¼ teaspoon and

 

 

 

reducing liquid by 2 to 3 teaspoons.

 

-Exceeding capacity of bread pan.

 

-Do not use more ingredients than recommended for

 

 

 

2 pound loaf.

 

-Not enough salt used or omitted.

 

-Use amount of salt recommended in recipe.

 

-Too much yeast or wrong type used.

 

-Measure right type of yeast accurately.

 

-Warm, humid weather.

 

-Reduce liquid by 1 tablespoon and reduce yeast by

 

 

 

¼ to ½ teaspoon.

11. Collapsed while

-May be caused by high altitude.

 

-Make recommended adjustment for high altitude

baking.

 

 

baking by reducing yeast by ¼ teaspoon and

 

 

 

reducing liquid by 2 to 3 teaspoons.

 

-Exceeding capacity of bread pan.

 

-Do not use more ingredients than recommended for

 

 

 

2 pound loaf.

 

-Not enough salt used or omitted.

 

-Use amount recommended in recipe.

 

-Too much yeast or wrong type used.

 

-Measure right type of yeast accurately.

 

-Warm, humid weather.

 

-Reduce liquid by 1 tablespoon and reduce yeast by

 

 

 

¼ to ½ teaspoon.

12. Doesn’t slice well,

- Sliced while too hot.

 

-Allow bread to cool on rack at least 15 to 30

very sticky.

 

 

minutes before slicing to release steam.

 

-Not using proper knife.

 

- Use a good bread knife or electric knife.

13. Open, coarse, holey

-Sale omitted.

 

-Assemble ingredients as listed in recipe.

texture.

- Too much yeast.

 

-Measure right amount of recommended yeast.

 

- Too much liquid

 

-Reduce liquid by 1 tablespoon.

 

 

 

 

14. Heavy, dense

-Too much flour.

 

-Measure accurately. Leveling off measuring cup.

texture.

 

 

-Measure recommended amount of yeast.

 

-Not enough yeast.

 

-Measure accurately.

 

-Not enough sugar.

 

 

15. Ingredients not

-Did not start bread maker.

 

-After programming control panel, press start/stop

mixed.

 

 

button to turn machine on.

 

-Forgot to put knead bar in pan.

 

-Knead bar must be on shaft in bottom of pan before

 

 

 

adding ingredients.

16. Burning odor noted

-Ingredients spilled inside oven.

 

-Be careful not to spill when adding to pan.

during operation

 

 

Ingredients can burn onto heating unit and cause

 

 

 

smoke.

 

-Pan leaks.

 

-Replacement pan may be ordered.

 

-Exceeding capacity of bread pan.

 

-Do not use more ingredients than recommended in

 

 

 

recipe and always measure accurately.

17.Bread sticks to

-Can happen over prolonged use.

 

-Wipe inside of bread pan, from ribs down, lightly

pan/difficult to shake

 

 

with vegetable oil or solid shortening. Or, add 1-

out.

 

 

teaspoon vegetable oil to liquid in pan before adding

 

 

 

dry ingredients. Do not use a vegetable spray as

 

 

 

sticking can worsen. Or, let bread sit in pan 10

 

 

 

minutes before shaking out.

 

 

 

-Replacement pan may be ordered.

 

 

 

18. WHOOPS!

-If machine in knead cycle, reprogram to same bread

setting and color and turn machine back on.

Machine unplugged by

-If machine in rise cycle, remove dough from pan, shape and place in greased 9-by-5-inch loaf pan, cover

mistake or power was

and allow to rise until doubled. Bake in preheated conventional oven at 350° F for 40 to 45 minutes or until

lost.

golden brown.

 

 

 

-If in bake cycle, preheat conventional oven to 350°

F and remove top rack. Carefully remove pan from

How can I save the

machine and place on bottom oven rack. Bake until golden brown.

 

 

 

bread?

 

 

 

16

Page 17
Image 17
West Bend L5005 important safety instructions Troubleshooting Guide