ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
Figure 30. Diagnostics Window (Sample values. Actual data may vary.)
Self-Test
This test button starts a testing process that verifies the integrity of all PPP account information.
Messages:
•Success: All stored information verified correctly.
•Failure: An error was detected in the stored PPP account information. The information needs to be re- entered.
ADSL Modem
This test button initiates a testing process that verifies management communications with the WireSpeed Pro transceiver.
Messages:
•In Service: The WireSpeed Pro is synchronized with the central office Channel Unit and is ready to send/receive data.
•Out of Service: The WireSpeed Pro transceiver is NOT synchronized with the central office Channel Unit, but is functioning properly. (This may happen if the connector cable is not correctly plugged into the WireSpeed Pro or the access jack.)
•Failure: The WireSpeed Pro transceiver is not functioning properly.
PPP Connection
This test button initiates a testing process that verifies connectivity with the service provider’s Remote Access Server (RAS).
Messages:
•Success: WireSpeed Pro has a verified connection with the ISP and is ready to send and receive data.
•No PPP Connection: There is no link between the WireSpeed Pro and the central office equipment.
•Failure: A PPP session is active, but WireSpeed Pro failed to get a response from the Remote Access Server.
31 | The WebShare Management Interface |
