ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
Inactivity Timer Timeout
WebShare provides an Inactivity Timer that closes an active PPP session if there has been no traffic through the WireSpeed Pro from or to any user. The timeout value may be adjusted on the LAN Advanced Configuration window shown in Figure 32. For a session to be “always on”, select the Inactivity Timer Disable option.
The Inactivity Timeout Value determines the length of time a session will remain connected with no data flow from either direction. The default setting is disabled. To enable, select LAN Advanced from the Management menu. In the LAN Advanced Configuration window, select the Enable option and enter an Inactivity Timeout time in minutes. The valid range is from 0 to 9999 minutes. A zero will has the same effect as disabling the timer.
Click the Save button in the LAN Advanced Configuration dialog box to commit the new account information to the WebShare. You will be prompted for a modem restart. Allow 20 seconds for the restart to complete. Interrupting the restart process may cause you to lose your setting data. (See “Restarting WebShare” on page 19.)
36 | The WebShare Management Interface |
