030-300411 Rev. A 76 July 2004
Westell (Models 6000, 6100, 6110)
User Guide
For example, the screen below displays America Online as the NAT service selected. Once you have selected a
service, click on enable.
If you clicked on enable, the following Host Service screen will be displayed. Click on OK. This will load the new
NAT Configuration and the settings will be saved automatically.
If you clicked on OK in the preceding pop-up screen, the Host Device screen will be displayed. The Host Device
screen will allow you to select which device will host the NAT service you selected on your local area network. You
must either select the device from the Host Device pull-down arrow or type an IP address in the field labeled IP
Address. Click on done.