Westell Technologies 6000, 6100, 6110 - page 77

030-300411 Rev. A 77 July 2004
Westell (Models 6000, 6100, 6110)
User Guide
NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to
your profile, you must first select the new NAT service. Then, you must load the new NAT Configuration, as
explained earlier in this section.
Once you have selected a NAT service and you have saved it to your NAT service profile, the following screen will
be displayed. It shows which NAT service is active for the selected profile.
If you select details, the screen below will display the details of the selected NAT service. Click on close to
continue. If you click on delete, you will remove that NAT service from your NAT service profile.
NOTE: If you would like to set up additional Advanced Service Configuration options, refer to section 12 (Setting
Up Advanced Service Configuration).