Westell Technologies 6000, 6100, 6110 11.6 Single Static IP Configuration , 11.6.1 Enabling Single Static IP Configuration

030-300411 Rev. A 66 July 2004
Westell (Models 6000, 6100, 6110)
User Guide
11.6 Single Static IP Configuration
The following settings will be displayed if you select Single Static IP Configuration from the Configuration
menu.
STOP: Static NAT must be disabled before you can enable Single Static IP. To disable Static NAT, select Service
Configuration from the Configuration menu. Next, click on the static NAT button. Select the device from the
Static NAT Device pull-down menu and click on disable. Return to Single Static IP Configuration by selecting
Single Static IP Configuration from the Configuration menu.
11.6.1 Enabling Single Static IP Configuration
To enable Single Static IP, click on the device (from the options listed in the window) that will share your Single
Static IP. Click on enable.
NOTE: The Single Static IP Configuration screen allows you to select the device on your LAN that will share your
Single Static IP.