Westell Technologies 6000, 6100, 6110 12. SETTING UP ADVANCED SERVICE CONFIGURATION (MODEL 6100) ,

030-300411 Rev. A 84 July 2004
Westell (Models 6000, 6100, 6110)
User Guide
12. SETTING UP ADVANCED SERVICE CONFIGURATION
(MODEL 6100)
You can set up additional Service Configuration options for your NAT Router that allow you to enter the port
forwarding and trigger ports ranges of your choice. Go to Configuration at the homepage menu and select Service
Configuration.
When you click on define custom service in the Service Configuration screen, the Custom Service screen will
guide you through the steps of creating an advanced NAT service entry via the define custom service button.
NOTE: Westell strongly recommends that you do not change any values in this section. If you experience any
problems, please reset your Router via the external hardware re-set button or the procedure defined under the
Maintenance menu.
Port Forwarding Ranges of Ports This option allows you to forward a range of WAN ports to an IP address on
the LAN.
Trigger Ports This option allows you to forward a range of ports to an IP address on the
LAN only after specific outbound traffic.