Whirlpool 2204658 manual Meat Drawer and Cover, Crisper and Crisper Cover

Meat Drawer and Cover

(on some models)

To remove the meat drawer:

1.Slide meat drawer out to the stop.

2.Lift front of meat drawer with one hand while supporting bottom of drawer with other hand. Slide drawer out the rest of the way.

3.Replace by sliding the drawer back in fully past the drawer stop.

To replace the meat drawer:

1.Guide the drawer into the meat cover supports.

2.Push the drawer in until it stops.

To remove the cover

1.Remove meat drawer.

2.Tilt front of cover up.

3.Lift back of cover.

4.Pull cover straight out.

To replace the cover:

1.Guide the cover’s rear hooks into the slots in the shelf supports on the back wall.

2.Tilt cover up at the front until the rear hooks drop into the slots.

3.Lower front of cover to a level position and replace meat drawer.

Crisper and Crisper Cover

(on some models)

To remove the crisper:

1.Slide crisper straight out to the stop.

2.Lift the front.

3.Slide crisper out the rest of the way.

4.Replace the crisper by sliding it back in fully past the drawer stop.

To remove the crisper cover:

1.Remove both crispers.

2.Holding glass insert firmly, grasp one side of crisper cover and lift the other side up from the bottom.

3.Slide the glass insert out to remove.

4.Lift cover frame up and remove.

NOTE: Before reinstalling the cover, make sure the U- shaped reinforcement bar is reinstalled.

To replace crisper cover:

1.Fit back of cover frame into supports on side walls of the refrigerator.

2.Lower front of the cover frame into place.

3.Slide rear of glass insert into cover frame and lower front into place.

15