22
There is interior moisture build-up
The air vents are blocked in the refrigerator.
Remove any objects from in front of the air vents. Refer
to “Ensuring Proper Air Circulation” for the location of air
vents.
The door is opened often.
To avoid humidity build-up, try to get everything you
need out of the refrigerator at once, keep food organized
so it is easy to find, and close the door as soon as the
food is removed. (When the door is opened, humidity
from the room air enters the refrigerator. The more often
the door is opened, the faster humidity builds up,
especially when the room itself is very humid.)
The room is humid.
It is normal for moisture to build up inside the refrigerator
when the room air is humid.
The food is not packaged correctly.
Check that all food is securely wrapped. If necessary,
repackage food according to the guidelines in the “Food
Storage Guide” section. Wipe off damp food containers
before placing in the refrigerator.
The controls are not set correctly for the
surrounding conditions.
Refer to the “Setting the Controls” section.
A self-defrost cycle was completed.
It is normal for droplets to form on the back wall after the
refrigerator self-defrosts.
The doors are difficult to open
The gaskets are dirty or sticky.
Clean gaskets and the surface that they touch. Rub a
thin coat of paraffin wax on the gaskets following
cleaning.
The doors will not close completely
Food packages are blocking the door open.
Rearrange containers so that they fit more tightly and
take up less space.
The ice bin is out of position.
Push the ice bin in all the way.
The crisper cover, pans, shelves, bins, or baskets
are out of position.
Put the crisper cover and all pans, shelves, bins, and
baskets back into their correct position. See the
“Refrigerator Features” section for more information.
The gaskets are sticking.
Clean gaskets and the surface that they touch. Rub a
thin coat of paraffin wax on the gaskets following
cleaning.
The refrigerator wobbles or seems unstable.
Level the refrigerator. Refer to the “Door Closing and
Alignment” section.
The doors were removed during product installation
and not properly replaced.
Remove and replace the doors according to the
“Reversing the Door Swing” section, or call a qualified
service technician.