Whirlpool 8910 manual do utilizador To refit the door, Removing The Side Grilles

To refit the door:

1.Insert the hinges in their seats.

2.Open the door fully.

3.Lower the two catches.

4.Close the door.

Fig. 1 Fig. 2

REMOVING THE SIDE GRILLES

The accessory-holder grilles are equipped with two fixing screws (fig. 1) for optimum stability.

1.Remove the screws and fixing plates on the right and left with the aid of a coin or tool.

2.To remove the grilles, lift them up (1) and turn them (2) as shown in fig. 3.

Fig. 1 Fig. 2 Fig. 3

MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)

1.Remove the side accessory holder grilles (Fig. 4).

2.Pull the heating element out a little (Fig. 5) and lower it (Fig. 6).

3.To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest on the lateral supports.

Fig. 4 Fig. 5 Fig. 6

EN8