Whirlpool CES365H, CES366H Removing The Oven Door, To remove, To replace, Caring For Your Range

Models: CES365H CES366H

1 40
Download 40 pages 12.74 Kb
Page 33
Image 33
REMOVING THE OVEN DOOR

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR

For normal use of your range, you do not need to remove the door. However, if you find it necessary to remove the door, follow the instructions in this section.

NOTE: The oven door is heavy.

Before removing the door:

1.Use a putty knife or screwdriver and insert it at the bottom corner of the door stop clip.

2.Pry door stop clip free and remove from front frame hinge slot. Take care not to scratch porcelain.

3.Repeat procedure for other door stop clip.

Door removal

Door stop clip

pin hole

 

Range

Hinge

Front frame

hanger

hinge slot

To remove:

1.Open the oven door. Insert door removal pins, included with your range, into both hinge hangers. Do not remove the pins while the door

is removed from the range.

2.Carefully close the door until it rests against the door removal pins.

3.Grasp the door on the sides with your fingers on To remove: the front of the door

and your thumbs on the inside surface.

4.Pull door straight up, then toward you. Hinge hangers will slide out of front frame hinge slot.

To replace:

NOTE: The door removal pins you inserted must still be in both hinges.

1. Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

continued on next page

33

Page 33
Image 33
Whirlpool CES365H, CES366H warranty Removing The Oven Door, To remove, To replace, Caring For Your Range