Whirlpool CES365H, CES366H warranty Setting the Clock, Using the Electronic Timer

USING YOUR RANGE

SETTING THE CLOCK

1.	Press CLOCK. The colon flashes during	PRESS	YOU SEE
	clock programming.
2.	Set the time.	PRESS	YOU SEE

Press the “up” (▲) or “down” (▼) pad(s) until the correct time shows on the display.

NOTE: Press a pad briefly to change time by a small amount. Press and hold a pad to change time by 10 minute increments.

3. Press CLOCK again to start the clock. The colon PRESS	YOU SEE
stops flashing when the clock is active.

USING THE ELECTRONIC TIMER

The timer does not start or stop the oven. It works like a kitchen timer. It can be set in hours and minutes up to 12 hours, 59 minutes. The timer will display minutes for settings under 1 hour and hours and minutes for settings over 1 hour. You will hear four 1-second tones when the set time is up.

NOTE: To display the time of day while the timer is counting down, press CLOCK. Time of day will be displayed for 5 seconds before returning to the timer countdown.

1. Press TIMER. The colon flashes during timer	PRESS	YOU SEE
programming.

The timer indicator light will light up.

			TIMER
2. Set the interval to be timed.		PRESS	YOU SEE
	Press the “up” (▲) or “down” (▼) pad(s) until
	the correct time shows on the display.
	The timer will begin counting down 5 seconds
	after the time is set.		TIMER
			continued on next page

15