Whirlpool DRYERS warranty Linens, Med, Knits

Cycle cohrol knob	Tsmperatu-re	l elactor	Start button
	(selectora vary	with maded)

If your dryer has a Temperature Selector with

3 temperature settings (low, med, high), refer to the chart below and the chart on page 9 for cycle information.

Loads tumble without heat during the last few minutes of all heated cycles. This makes a load easier to handle and helps keep wrinkles from setting in.

Uslng your automatic cycle

Use your automatic cycle and a heat setting to automatically dry most loads. The chart below suggests heat settings for various types of loads.

Using Heavy Dry

(on 8ome models)

Use Heavy Dry and a high heat setting to dry large items or items that are thicker or heavier than a regular load (heavy cotton bath sheets or robes).

NOTE: To help reduce wrinkling, remove the load from the dryer as soon as tumbling stops. This is important for permanent press, knits and synthetic fabrics. Do not overdry. Overdrying can cause shrinkage, static cling, and damage some fabrics.

TYPE OF LOAD						AUTOMATIC CYCLE
COlTONS	AND LINENS
Extra Heavy-Bedspreads,				mattress	pads, quilts	HIGH
Heavyweight-Towels,			jeans, corduroys, work clothes			HIGH
Mediumweight-Sheets,			cotton underwear, diapers			MED
Lightweight-Satistes,			organdies, lingerie			LOW
PERMANENT PRESS, SYNTHETICS AND BLENDS
Heavyweight-Work		clothes, jackets,			raincoats	HIGH
Mediumweight-Shirts,			play clothes,		sheets, slacks	MED
Lightweight-Lingerie,			blouses, dresses			LOW
KNITS
Heavyweight-Cottons,			rayons, blends, T-shirts, slacks,			HIGH
shirts
Mediumweight-Synthetics				(polyester, acrylic, etc.), dress		MED
slacks, skirts, sweaters
Lightweight-Synthetics			(polyester, acrylic, etc.) and			LOW
blends,	lingerie,	blouses,		dresses
DELICATE	FABRICS
Sheer curtains (2 or 3 panels), gauze, lace, etc.						LOW

14