Using the Air cycle (no heat)
Fke Hazard
Do not dry plastic or rubber items with heat. Use the Air cycle, or line dry.
Failure to do so could result in fire or damaged items.
The dryer does not heat when the Cycle Control Knob is set in the Air cycle. This cycle can be used to fluff or air dry bedding, plastic tablecloths, foam rubber pillows, stuffed toys, sneakers, etc.
1.Turn the Cycle Control Knob to the number of minutes you want in the Air cycle. (If your dryer has a temperature selector, no temperature needs to be selected. Cycle is unheated.) Refer to the chart below for suggested times.
2.Push the Start Button.
NOTE: Repeat steps above if more time is needed to dry items.
TYPE OF LOAD
RUBBER, PLASTIC,
Olefin, Polypropylene, Sheer nylon
Using the Timed Drying cycle
Use the Timed Drying cycle for any load you want to dry by time. This cycle is designed for small loads or large bulky items.
lTurn the Cycle Control Knob to the number of minutes you want in the Timed Drying cycle. (If your model has a Temperature Selector, set the Temperature Selector to the desired setting.)
lFor a damp dry, turn the Cycle Control Knob to 30 minutes or less. (If your dryer has a Damp Dry cycle, see page 10.)
The last few minutes of this cycle are without heat to help make the load easier to handle.
AIR
9
