Whirlpool DRYERS warranty Diapers, baby clothes Elastic Items

Curtains, slipcovers

lDraperies, slipcovers

lSheers, some synthetic curtains

lBonded or laminated fabrics

Diapers, baby clothes

Elastic Items

FIberglass materials

Flame- retardant tlnlshes

Napmd

Items

lCorduroy, velveteen

Qullted, down- filled Items

Snowsults,

Jackets

lNylon, polyester-base

Remove drapery weights and hooks before laundering.

1.Use lowest temperature or an Air setting.

2.Leave room in dryer for load to fluff.

3.Remove from dryer while slightly damp. Do not overdry.

For slipcovers, replace slipcovers while still slightly damp. They will dry to fit tightly.

Dry only a few minutes.

Do not overdry or tumble in high heat. Overdrying loosens the adhesive and causes fabrics to separate.

Wash and dry small items in a mesh bag or pillowcase for convenient handling.

1.Dry according to fabric and cycle settings listed on your control panel page (pages 12-l 6).

2.Remove diapers and cotton knit items while still slightly damp. They will feel softer, shrink less and be easier to fold.

Dry at lowest temperature setting. Remove from dryer while still slightly damp.

Do not machine wash or dry fiberglass materials. Small particles can stick to fabrics washed or dried in following loads and cause skin irritation.

Some items have been treated with a flame-retardant finish to improve their resistance to burning. Such items are clearly labeled. To retain flame-retardant qualities through continuous use and washing, clean and dry according to the manufacturer’s instructions.

Dry separately or with similar colors to avoid lint transfer. Follow care label directions.

1.Dry according to fabric and cycle settings shown on your control panel page (pages 12-16).

2.Remove from dryer while there is still a trace of moisture.

3.Smooth, reshape and air dry before putting away.

Follow care label instructions.

1.Dry one at a time.

2.Remove from dryer and shake or fluff the item during the drying cycle.

3.Smooth and reshape before putting away.

Check label for fiber content, then see your control panel page (pages 12-l 6) for cycle and temperature recommendations.

Follow care label directions.

1.Dry garment for about 10 minutes. Remove and turn inside out. Dry for 10 more minutes.

2.Remove from dryer immediately and hang on a non-rusting hanger to finish drying. This will help eliminate wrinkles.

continued on next page

25