Whirlpool DRYERS warranty Using dryer fabric softeners, Saving energy, Vacation care

TInted,	dyed or	Dry according	to fabric, weight and care label instructions. Wipe the dryer
non-colorfast		drum carefully	to remove any dye or lint that can		be transferred	to other
Items		loads. See “Cleaning the dryer		interior” on page	19.
Towels		Select cycle according to fabric		type. Some towels, particularly		those
		made of a blend of synthetic fibers and natural fibers (polyester and
		cotton blends), may shed more lint than other towels causing your dryer’s
		lint screen to get full faster. Be sure to remove lint from the dryer lint
		screen before and after drying new towels.
Washable	knlts	Do not overdry	knits. Overdrying	can cause shrinking and static		cling.

1.Select cycle according to fabric and construction.

2.Turn synthetics and blends inside out when drying to avoid pilling.

3.Remove cotton and rayon knits while still slightly damp. Stretch into shape and lay flat to finish drying.

Using dryer fabric softeners

Dryer fabric softeners are recommended for reducing static cling (static can also be re- duced by not overdrying) and for softening fabrics. Always follow package instructions carefully.

lPut fabric softener sheet on top of the load before startlng the dryer. Do not add a fabric softener sheet after the cycle has started. Instant heat can cause the fabric softener to spot fabrics.

l

l

Clear, grease-like spots can result from the fabric softener sheet becoming tangled in an item during tumbling. If fabric softener causes a stain, wet the stain and rub with liquid detergent or bar soap, rewash.

Some fabric softeners can clog the lint screen and slow drying. Use fabric softeners labeled as dryer safe.

Saving energy

l

l

l

Dry only full loads without overdrying.

Avoid overloading dryer, adding wet items to a partly dried load, or opening the door unnecessarily.

Plan your laundry to dry one load after another. A warm dryer shortens drying time.

l Shorten drying times by exhausting dryer properly and cleaning exhaust duct as needed.

-Keep the lint screen clean.

-Use your dryer in a room where room air temperature is above 45°F (7°C).

-Sort loads by fabric weight and type.

Vacation care

1.Unplug power supply cord or turn off electrical power supply.

2.Clean lint screen.

26