Connecting to water line

1.Find a %-inch to 1%-inch vertical COLD water pipe near the refrigerator.

NOTE: Horizontal pipe will work, but the following

precaution must be taken: Drill on the top side of the pipe, not the bottom. This will help keep water away from the drill. Thii also keeps normal sedi- ment from collecting in the valve.

2.Measure from connection on rear of refrigerator to water pipe. Add 7 feet (2.1 m) to allow for moving refrigerator for cleaning. This is the length of %inch O.D. copper tubing you will need for the job (length from connection to water pipe PLUS 7 feet [2.1 ml). Be sure both ends of copper tubing are cut square.

3.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

4.Using a grounded drill, drill a %-inch hole on the wM water pipe you have selected.

5.Fasten shut-off valve to wld water pipe with pipe clamp. Be sure outlet end is solidly in the %-inch drilled hole in the water pipe and that washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing, especially if soft (wiled) copper tubing is used. Now you are ready to wnnect the copper tubing.

5.Slip compression sleeve and compression nut on copper tubing as shown in diagram. Insert end of tubing into outlet end squarely as far as it will go.

Screw compression nut onto outlet end with adjust- able wrench. Do not overtighten. Turn ON main water supply and flush out tubing until water is clear. Turn OFF shut-off valve on the water pipe. Coil the copper tubing.

Connecting to refrigerator

1.(On kit models, assemble water valve to refrigerator per kit instructions.) Route the copper tubing through the tube clamp provided as shown at left. Connect the %nch copper tube from the shut-off valve to the water valve at the lower, left rear of cabinet. Use a compression nut and sleeve as shown at left. Tighten the compression nut. Do not over-tighten.

2.Turn shut-off valve ON. CHECK FOR LEAKS. TIGHTEN ANY CONNECTIONS (INCLUDING CONNECTIONS AT THE VALVE) OR NUTS THAT LEAK.

3.The ice maker is equipped with a built-in water strainer. If local water conditions require periiic cleaning or a well is your source of water supply, a second water strainer should be installed in the W-rch water line. Obtain a water strainer from your nearest appliance dealer. Install at either tube connection.

4.Reconnect electrical supply to refrigerator.

Vertical cold water pipe

\q

, Warher

l/pinch O.D. copper tubing (length from inlet on rear of refrig- erator to water plpe plus 7 feet (2.1 m])

::::y2 Ly@ % Compression sleeve

Compression

sleeve

Compresslon nut

TO REFRIGERATOR +

Use only l/cinch copper tubing from cold water line

Tube clamp

l/pinch compression nut and sleeve

10

Page 11
Image 11
Whirlpool ET14HJXDN01 manual Connecting to water line, Connecting to refrigerator, To Refrigerator +

ET14HJXDN01 specifications

The Whirlpool ET14HJXDN01 is a reliable top-freezer refrigerator that combines functionality, efficiency, and style to meet your cooling needs. This model is known for its ample storage space and user-friendly features, making it an ideal choice for families and individuals alike.

One of the standout features of the ET14HJXDN01 is its generous storage capacity. With a total volume of approximately 14.3 cubic feet, it provides plenty of room for fresh groceries, frozen foods, and beverages. The top-freezer design allows for easy access to frequently used items, while the dedicated freezer compartment keeps frozen foods organized and within reach.

The refrigerator is equipped with adjustable shelves, which offer flexible storage options. These shelves can be repositioned to accommodate taller items or removed entirely when needed. Additionally, the refrigerator features a full-width crisper drawer that helps keep fruits and vegetables fresh for longer periods, preserving their flavor and nutritional value.

One of the key technologies incorporated into the ET14HJXDN01 is the Adaptive Defrost system. This innovative feature optimizes the defrost cycle based on the refrigerator’s usage, ensuring that it runs efficiently while preventing excessive frost buildup in the freezer. This results in more consistent cooling performance and improved energy efficiency.

Energy efficiency is another notable characteristic of the Whirlpool ET14HJXDN01. It is designed to meet energy-saving guidelines, making it an eco-friendly choice. The Energy Star certification means that this refrigerator operates with lower energy consumption, which not only reduces your utility bills but also helps in minimizing environmental impact.

For added convenience, the ET14HJXDN01 comes with a reversible door that allows you to customize the door swing to fit your kitchen layout. This versatility ensures that the refrigerator can be positioned in various spaces while maintaining ease of access.

In terms of design, the Whirlpool ET14HJXDN01 features a sleek and modern appearance with a textured finish that resists fingerprints and smudges. The simple, intuitive controls make it easy to adjust temperatures and settings, ensuring an optimal storage environment for all types of food.

Overall, the Whirlpool ET14HJXDN01 is a dependable refrigerator that brings together practical features, efficient technologies, and a stylish design. It is an excellent choice for those seeking a combination of performance and elegance in their kitchen appliance.