Whirlpool FGPSOOB, FGPSIOB Surface burners, Remove the cooktop, following the instructions on

Surface burners

1. Remove the cooktop, following the instructions on page 18.

2. Wipe off surface burners with warm, eoapy water and a sponge after each use. To remove cooked-on food, soak the burners in a vinegar and water solution for 20 minutee. Scrub with a plastic scrubbing pad.

3. If poti are clogged, clean wlth a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the pot3s.

4. Occasionally check the burner flames forprop6rsizeandshapeassJmwn.A

good flame is blue in cobr. If flames lift off ports, are yelbw, or are noisy when tumed off, you may need to clean the burners (see above), or call a qualiii technician for adjustment.

5. Replace cooktop.

Typical surface burner flame mttha highed l elting

19