Caring for the Filters
The grease filters should be removed and cleaned often, at least once a month. NOTE: if your
microwave hood combination is installed to recirculate air, the charcoal filter (Part No. 4158313) should be replaced every
1.For your personal safety, turn off the electric power at the main power supply.
4.To replace grease filters, slide filter in the frame slot on the front of the opening.
Push filter upward and push to the rear to lock into place.
8.Slide a new charcoal filter into place. The filter should rest at the angle shown.
2.To remove grease filters, slide each filter to the front.
Pull filters downward and push to the rear. The filter will drop out.
5.To replace charcoal filter: remove the vent cover mounting screws.
6.Tip the cover forward, then lift out to remove.
9.Slide the bottom of the vent cover into place. Push the top until it snaps into place. Replace the mounting screws.
10.Turn the power back on at the main power supply.
3.Soak grease filters in hot water and a mild detergent. Scrub and swish to remove embedded dirtand grease. Rinse well and shake to dry. Do not use ammonia or place in a dishwasher.
The aluminum will darken.
II
7.Lift the back of the char- coal filter. Slide the filter straight out.
11.Do not operate the hood without the filters in place.
