Microwave oven controls

There are four parts in the control section:

-The Digital Display/Clock and Indicator Lights

- Command Pads - Number Pads

-Fan and Light Pads

Instructions for each control are covered on the following pages. Read them carefully.

When you first plug in the oven, a tone sounds and the Display will show 88:88. If after you set the Clock (page 6), the Display again shows all 8’s; your electricity was off for a while.

Reset the Clock.

Digital Display/Clock and Indicator

,-+ lights

When you are not using the micro- wave oven, it is an accurate Digital Clock.

When you are using the microwave oven, it displays time settings, Indicator Lights and shows you what Number Pads you touched.

7 Command Pads

//

Touch Command

Pads to tell the micro- wave oven what to do and in what order. A few examples:

-CLOCK SETtells the oven you are going to set the clock.

-START tells the clock to start.

See page 6 for information on the tone you hear when touching any pad.

Each Command Pad (except STARTand CANCEL] lights an Indicator Light on the digital display.

Page 5
Image 5
Whirlpool MH6700XW, MH6701XW manual Microwave oven controls, + lights, Command Pads