The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.
5.Touch a Number Pad for the Cook Power you want.
The AUTO SETand PROBE TEMP Indica- tor Lights will stay on. The Display will show “COOL” if the food is less than 90°F.As the food cooks, the Display
6. Touch START.will show the internal temperature of the food for every 5°F increase.
When the probe senses the tempera- ture you selected, the oven shuts off. “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds (to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The Display will then show the time of day.
NOTE: You can set Auto Set TEMP to follow COOK.
Auto Set TEMP can be programmed with the Temperature Probe out, but the oven will pause between the last Cook cycle and “PROB”will show on the Display to remind you to plug in the Temperature Probe.
Changing the Pre-Programmed Setting
You can change the
1.Touch TEMP twice
2.Touch the Number Pads for the new desired temperature between 90°F and 200 ‘F If HIGH Cook Power is desired, skip to Step 6.
3.Touch COOK POWER
4.Touch the Number Pad for the desired Cook Power.
5.Touch START.The oven will cook to the new temperature at the Cook Power you selected. After the cooking is complete, the oven will remember that temperature and Cook Power for future use. NOTE: If the electric power goes off, the oven will go back
to the
