Caring for the filters

Do not allow grease and soil to build up in the grease filters. It will decrease the exhaust fan efficiency. Remove and clean grease filters at least once a month. When you have removed a grease filter or a charcoal filter remember to replace the filter before you operate the hood.

NOTE: The charcoal filter is available as an accessory when the microwave oven is installed to recirculate air.

2.Soak grease filters in hot water and a mild detergent. Scrub and swish to remove embedded dirt and grease. Rinse well and shake to dry. Do not clean filters with ammonia, corrosive cleaning agents such as lye-based oven cleaners, or place them in a dishwasher. The filters will turn black or could be damaged.

Electrical Shock Hazard

Disconnect power before removing vent cover.

Replace ail panels before operating.

Failure to do so can result in death or electrical shock.

Before removing filters:

l Unplug power cord or turn off power supply.

Grease filters:

1.To remove grease filters, slide each filter to the side. Pull filters downward and push to the other side. The filter will drop out.

3.To replace grease filters, slide filter in the frame slot on one side of the opening. Push filter upward and push to the other side to lock into place.

46

Page 46
Image 46
Whirlpool MH7135XE warranty Caring for the filters, Before removing filters, Grease filters