The oven light

Electrical Shock Hazard

Disconnect power before removlng vent cover.

Replace all panels before operating.

Failure to do so can result In death or electrical shock.

1. Turn off power at the main power supply.

2.Remove the vent cover mounting screws.

3.Tlp the cover forward, then lift out to remove.

4. Remove bulb holder mounting screw.

5.LIR up the bulb holder.

6.We recommend replacing the bulb with a candelabra-base 30-watt bulb available from your authorized Whirlpool service company, or by calling the Consumer Assistance Center at 1-866-253-l 301. Make sure to have your model number when ordering.

7.Replace the bulb holder and mounting screw.

8.Slide the top of the vent cover into place. Push the bottom until it snaps into place. Replace the mounting screws. Turn the power back on at the main power supply.

49

Page 49
Image 49
Whirlpool MH7135XE warranty Oven light