Caring for the filters

Do not allow grease and soil to build up in the grease filters. It will decrease the exhaust fan efficiency. Remove and clean grease filters at least once a month. When you have removed a grease filter or a charcoal filter remember to replace the filter before you operate the hood.

NOTE: If your microwave hood combination is installed to recirculate air, the charcoal filter (Part No.435941 6) should be installed. The charcoal filter cannot be cleaned and

should be replaced every 6-l 2 months.

Grease filters:

1.To remove grease filters, slide each filter to the side. Pull filters downward and push to the other side. The filter will drop out.

Electrical Shock Hazard

Disconnect power before removing vent cover.

Replace all panels before operating.

Failure to do so can result in death or electrical shock.

Before removing filters:

l For your personal safety, turn off the electric power at the main power supply.

2.Soak grease filters in hot water and a mild detergent. Scrub and swish to remove embedded dirt and grease. Rinse well and shake to dry. Do not use ammonia, corrosive cleaning agents such as lye-based oven cleaners, or place in a dishwasher. The filter will turn black or could be damaged.

3.To replace grease filters, slide filter in the frame slot on one side of the opening. Push filter upward and push to the other side to lock into place.

37

Page 37
Image 37
Whirlpool Q, MHE11REB warranty Caring for the filters, Grease filters, Before removing filters