Charcoal filter :

To remove:

1.Remove the vent cover mounting screws.

2.Tip the cover forward, then lift out to remove.

3.Llft the back of the charcoal filter. Slide the filter straight out.

To replace:

1 . Slide a new charcoal filter into place. The filter should rest at the angle shown.

2.Slide the bottom of the vent cover into place. Push the top until it snaps into place. Replace the mounting screws.

After replacing filters:

l Turn the power back on at the main power SUPPlY.

l Do not operate the hood without the filters in place.

38

Page 38
Image 38
Whirlpool MHE11REB, Q warranty Charcoal filter, After replacing filters