Connecting to the DVI-I terminal

Some of DTV receivers (Set-Top-Box) have an RGB connector (D-sub 15 pin) instead of a component output. The DVI adapter, which provides this connection terminal for the PDP, may be used for this con- nection.

Connect the DVI adapter into the VGA cable and connect to the PDP DVI-I input terminal. Connect the other end of the cable to D-sub output terminal of DTV receiver.

Connect audio cable from the audio output terminal of DTV receiver to the DVI-I audio input terminal of the PDP.

How to watch DTV

1.Turn on the PDP monitor and press on the remote controller.

2.Use to select component and then press .

3.When connecting DVI-I terminal, use to select RGB1(Analog) and then press .

4.Turn the DTV receiver on and select the channel that you want.

·DTV video output of 480p or 720p will show the clear and detail image of screen.

21

Page 21
Image 21
Planar PDP 42 manual Connecting to the DVI-I terminal, How to watch DTV