How to use as PC Monitor

1.Turn on the PDP and press on the remote controller.

2.Use to select RGB1(Analog) and then press . (If the PC output is set to Digital, select RGB2(Digital).)

3.This PDP does not support Plug & Play function. When setting the PDP, select default.

4.Set the PC video output mode to VGA (640×480)/ SVGA (800×600)/ XGA (1024×768). In the mode higher than SXGA (1280×1024), "Out of Range" message appears. Be sure to change your PC video format to less than XGA mode. (Please refer to page 51 for the modes that PDP supports)

23

Page 23
Image 23
Planar PDP 42 manual How to use as PC Monitor