Sanyo M1 manual Setting Up Screen Call, Activating Screen Call, To set Auto Screen Call

Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded announcement, either one that is prerecorded or one that you have recorded.You can also record the caller’s message into the Voice Data list.

Activating Screen Call

To start Screen Call when you have incoming calls:

When the phone rings or vibrates, select Options (right softkey) > Screen Call.

To set Auto Screen Call:

1.Select > Tools > Voice Services > Screen Call > Auto.

2.Select On and press .

3.Set the answering time by using numeric keys or by pressing the navigation key up or down.

4.Select OK (left softkey). (The icon is displayed on the standby display.)

Tip:

While the caller’s message is being recorded, press TALK to answer the call, or press END to stop recording and disconnect the call.

Selecting an Announcement for Screen Call

To select a Screen Call announcement:

1.Select > Tools > Voice Services > Screen Call > Announcement.

2.Select Pre-Recordedor Custom and press .

134 Section 2H: Using Your Phone’s Voice Services