To dial or save phone numbers with pauses:

1.Enter the phone number.

2.Select Options (right softkey) and select either Hard Pause or

2-Sec. Pause. (Hard pauses are displayed as a “P” and two-second pauses as a “T.”)

3.Enter additional numbers.

4.Press to dial the number.

– or –

Select Options (right softkey) > Save Phone# to save the number in your Contacts.

Note:

When dialing a number with a hard pause, press TALK to send the next

 

set of numbers.

 

 

Using Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. It allows you to dial a number by entering the last four or five digits of any number in your Contacts directory.This feature becomes available when you enable Abbreviated Dialing and program a five-or six- digit prefix you wish to use for abbreviated dialing. (See “Setting Abbreviated Dialing” on page 68.)

To place a call using Abbreviated Dialing:

1.Enter the last four or five digits of the prefix phone number.

2.Press .

Note:

If the digits match more than one entry,theAbbrev.Dial list will be displayed;

 

select the correct entry and press TALK again.

 

 

Tip:

You can also place a call by selecting Options (right softkey) >

 

Abbrev. Dial after step 1 above.

 

 

Phone Basics

Section 2A: Phone Basics

35

Page 51
Image 51
Sanyo M1 manual Using Abbreviated Dialing, To dial or save phone numbers with pauses, Enter the phone number