Sanyo M1 manual Adjusting the Phone’s Volume Settings, Adjusting the Alert Volume Settings

Models: M1

1 284
Download 284 pages 42.38 Kb
Page 64
Image 64

Adjusting the Phone’s Volume Settings

You can adjust your phone’s volume settings to suit your needs and your environment.

To adjust the ringer volume:

1.Select > Settings > Sounds > Volume > Ringer.

2.Using the navigation key, choose a volume level, 1 Beep, or Ringer Off and select Done (left softkey).

Tip:

When selecting a volume, press MENU to put a check mark in the box next to Always Vibrate.This setting makes the ringer vibrate at any volume level.

You can choose a volume level, 1 Beep, Ringer Off, Vibrate All, or Silence All from standby mode (or adjust the earpiece volume during a call) by using the volume key on the left side of your phone.

Adjusting the Alert Volume Settings

This setting controls the alert volume of Ready Link,Voicemail, message, and Calendar/Alarm.You can set the alert volume separate from the ringer volume setting.

To adjust the alert volume setting:

1.Select > Settings > Sounds > Volume> Advanced Ringer.

2.Select Ready Link, Voicemail, Messaging, or Calendar/Alarm.

3.Using the navigation key, select Separate Vol.

4.Press the navigation key right or left to choose a volume level, and select Done (left softkey).

48 Section 2B: Controlling Your Phone’s Settings

Page 64
Image 64
Sanyo M1 manual Adjusting the Phone’s Volume Settings, Adjusting the Alert Volume Settings, To adjust the ringer volume