Sanyo M1 Alert Notification, Adjusting the Phone’s Receiver Volume, To adjust the receiver volume

Adjusting the Phone’s Receiver Volume

To adjust the receiver volume:

1.Select > Settings > Sounds > Volume > Receiver.

2.Select either Earpiece or Speaker.

3.Using the navigation key, choose a volume level, and select Done (left softkey).

Adjusting the Application, Start-up/Power-off, or Key Beep Volume

To adjust the Application, Start-up/Power-off, or Key Beep volume:

1.Select > Settings >Sounds > Volume.

2.Select Application, Start-up/Pw-off, or Key Beep.

3.Using the navigation key, choose a volume level, and select Done (left softkey).

Alert Notification

Your phone can alert you with an audible tone when you change service areas, once a minute during a voice call, or when there are incoming or missed Ready Link calls.

To enable or disable alert sounds:

1.Select > Settings > Sounds > Alerts.

2.Select Service, Ready Link, Voicemail, Messaging, Minute Beep, or Signal Fade and press .

3.Use your navigation key to select a setting and press .

Your Phone’s Settings

Section 2B: Controlling Your Phone’s Settings 49