Installation Instructions
Before you begin operating the oven, carefulfy read the folbwing instructions.
1.Empty the microwave oven and clean inside it with a soft, damp cbth. Check for damage such as misaligned door, damage around the door, or dents inside the oven or on the exterior. If there is any damage, do not operate the unit until it has been checked by an authorized Whir@ml service technician and any repairs made.
Exhawtvents
(on bottom in front) | wlnw | vent8 |
|
| (on side) |
NOTE: Do not block the exhaust vents or rear air intake openings. Allow a few inches of space at back of oven where intake openings are bcated. Bbcking the air intake openings and exhaust vents can cause damage to the oven and poor cooking results. Make sure the microwave oven legs are in pke to ensure proper airfbw.
2.Put the oven on a cart, counter, table, or shelfthatisstrongenoughtoholdthe
oven and the food and utensils you put in it. (lhs control side of the unit is the heavy side. Use can when handling.) The weight of Model MT2081 XB is approximately 31 bs (14 kg). The weight of Model MT41 11XB is appmxirnatefy 34 lbs (15.3 kg). The microwave oven should be at a terrperature above 50°F (10°C) for proper operation.
Fin Hazard
Donotinstalltheovennexttoorovera
’heat source (for example, a cooktop or range). Also, do not install oven in any area where excessive heat and steam are generated.
Failure to folbw the above could resuft
,in fire, electrical shock, excessive expo- sure to microwave energy, or other personal injury.
