www.clearcreekspas.com
Alternate Use of Water Rainbow Spout as Fill Spout
You can use your Water Rainbow spout as a fill spout by permanently plumbing it to a fresh water supply if local codes permit. Local plumbing codes may require the use of an
Do not interconnect water supply with recirculating system of the spa.
To make the connections necessary to use the Water Rainbow as a fill spout, follow this procedure:
•Make sure spa is unplugged and completely drained.
•Unscrew the spout from the 3/4" pipe.
•Cut 3/4" piping as shown in illustration below.
•Cap off the piping by cementing a 3/4" PVC cap where cut has been made.
•Connect permanent plumbing line to the spout.
WATER RAINBOW SPOUT
INSTALL AND CEMENT 3/4" PVC CAP
www.clearcreekspas.com