Whirlpool oortable spa Spa Light, Covering Your Spa, Cleaning Your Spa, Repairs to the Acrylic

www.clearcreekspas.com

MAINTENANCE

Spa Light

Two lenses, one blue and one red, are provided with your spa. To change the lens, simply pull the lens out of the fitting and replace it with the desired colored lens. Two replacement bulbs (GE Model 912, 12W, 12V) are also included. Put them in a safe place for future use. When a bulb burns out, replace it from the back of the light fitting, pulling out the bulb receptacle.

SPA LIGHT BULB REPLACEMENT

	NORMAL
LOCKING	LENS
NUT

Covering Your Spa

An optional rigid spa cover is available to place on top of the spa. Use of this cover will help to minimize heat loss and evaporation, and thus reduce energy costs. The cover is also an attractive and efficient means of preventing debris such as leaves and dirt from entering your spa when not in use. Follow the instructions for use and care provided with the spa cover.

CAUTION

While the spa cover is rigid, it is not designed to

support any weight. Therefore, as a safety precaution and to preserve the life of your cover, you must not sit,

LIGHT BULB

COLORED FILTER

stand, or lie on it; nor should you place objects of any kind on top of it.

JacuzziWhirlpoolBathdoesnotguaranteeorwarrent this cover.

BULB

RECEPTACLE

	LIGHT
	BEZEL
Cleaning Your Spa	SHELL

Your Quantum Plus spa shell consists of two layers of plastic materials. Its smooth top surface of acrylic is tough and durable and contains concentrated color. This is supported by a substantial thickness of fiberglass-rein- forced polyester resin. A catalyst causes a chemical reac- tion during manufacture that bonds these layers perma- nently into a hard, strong material. With a minimum amount of care and cleaning, your whirlpool spa will look new for years.

To clean your spa, simply use a mild non-abrasive liquid detergent, isopropyl alcohol, or commercially prepared spa cleaner. Do not use abrasive cleaners. You can protect and restore the gloss to a dulled surface by applying a plastic polish specifically designed for use on acrylic fin- ishes (methylmethacrylate). If an acrylic polish is not available, an automotive paste wax will do.

Use a spa cleaner for residue buildup at the water level of the spa surface. This may be applied to the acrylic surface with a soft cloth and wiped clean. Use sparingly in small amounts to avoid contaminating the spa water. If heavily soiled, it may be advisable to lower the water level 2 to 3 inches before cleaning; then refill to normal level.

QUANTUM SPA WITH RIGID

INSULATING COVER

Repairs to the Acrylic

Minor scratches which do not penetrate the color finish (acrylic) can be removed with 600-grit wet/dry sandpaper. Restore the glossy finish with an acrylic polish or a compa- rable automotive paste wax.

Major scratches or gouges which penetrate the acrylic surface will require refinishing. Ask your Jacuzzi Whirlpool Bath dealer for special instructions.

www.clearcreekspas.com