Using the rotisserie
The rotisserie has 5 parts. It is used with the
Grill Module.
NOTE: Make sure the grill controls are OFF and the grill is cool before installing rotisserie.
Motor
j%LLacleTeYinai ,
1. To | install, remove | 3. Set in rotisserie | 4. Plug | in the heat- |
the | grills. | rack. | ing | element. |
2. Lift and pull out the heating ele- ment.
5.Lift grease well slightly and slide side baffles into place.
6.Install rotisserie motor as shown.
To put meat on spit
1.Put fork on the spit pointing away from the handle.
2.Push spit through meat so the weight is bal- anced around the center.
3.Put the second fork on the spit pointing toward the meat.
4.Push both forks into the meat and tighten the thumbscrews.
5.Push the pointed end of the spit all the way into the motor socket.
6.Put the handle end of the spit into the rack slot.
7.Plug in and turn on the rotisserie motor. Turn
on the Grill Module. See page 11 for sug- gested cooking times.
1. To remove, slide | 2. Lift and | pull | out | 3. Remove | motor | 4. | Plug | in | the heat- | ||
out the side | the | heating | ele- | and | rotisserie rack |
| ing | element. | |||
baffles. | ment. | Note: | Make | and | set | aside. | 5. | Replace | grills over | ||
| sure | element | is |
|
|
|
| heating | element. | ||
| completely | cool |
|
|
|
|
|
|
| ||
| before | removing. |
|
|
|
|
|
|
| ||
10
