CARING FOR YOUR RANGE
COIL ELEMENTS AND REFLECTOR BOWLS (CONT.)
3.Hold the coil element as level as possible with the terminal just started into the receptacle. Push
the coil element terminal into the receptacle.
4.When the terminal is pushed into the receptacle as far as it will go, push down the edge of the coil element opposite the receptacle.
NOTE: Reflector bowls reflect heat back to the cookware on the coil elements. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
If a reflector bowl changes color, some of your cookware may not be flat enough, or some may be too large for the coil element. In either case, some of the heat that’s meant to go into or around cookware goes down and heats the reflector bowl. This extra heat can cause it to change color.
LIFT-UP COOKTOP
NOTE: Do not drop the cooktop. Damage could result to the porcelain and the cooktop frame.
1.Lift the front of the cooktop at both front corners until the support rods lock into place.
2.Wipe the surface under the cooktop with warm, soapy water and a sponge. Use a soapy steel- wool pad on heavily soiled areas.
3.To lower the cooktop, lift the cooktop from both sides while pressing the support rods back to unlock them. Lower the cooktop into place.
25
