CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR
For normal use of your range, you do not need to remove the door. However, if you find it necessary to remove the door, follow the instructions in this section.
NOTE: The oven door is heavy.
Before removing the door:
Door removal | Door stop clip |
pin hole |
|
1.Use a putty knife or screwdriver and insert it at the bottom corner of the door stop clip.
2.Pry door stop clip free and remove from front frame hinge slot. Take care not to scratch porcelain.
3.Repeat procedure for other door stop clip.
Hinge
Range
Front frame
hanger
hinge slot
To remove:
1.Open the oven door. Insert door removal pins, included with your range, into both hinge hangers. Do not remove the pins while
the door is removed from the range.
3.Grasp the door on the sides with your fingers on 
the front of the door
and your thumbs on the inside surface.
2.Carefully close the door until it rests against the door removal pins.
4.Pull door straight up, then toward you. Hinge hangers will slide out of front frame hinge slot.
To replace:
NOTE: The door removal pins you inserted must still be in both hinges.
1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.
26
