CARING FOR YOUR RANGE
2.Line up openings in the reflector bowl and notches in the trim ring with the coil element receptacle.
3.Hold the coil element as level as possible with the terminals just started into the
receptacle. Push the coil element terminals into the receptacle.
NOTE: Reflector bowls reflect heat back to the cookware on the coil elements. They also help catch spills. When they are kept clean, they reflect heat better and look newer longer.
If a trim ring gets discolored, some of your cookware may not be flat enough, or some may be too large for the coil element. In either case, some of the heat that is meant to go into or around cookware goes down and heats the trim ring. This extra heat can discolor it.
Lift-up cooktop
1. Lift front of cooktop at the center and swing the support rod up.
2. Carefully lower the cooktop onto the support rod.
NOTE: Do not drop the cooktop. Damage could result to the porcelain and the cooktop frame.
3. Wipe with warm, soapy water. Use a soapy
4.To lower the cooktop, lift cooktop while lowering the support rod back to its resting position. Lower the cooktop into place.
37
