Set the Oven Selector on BAKE.
Set the | Oven | Temperature | Let the | oven | preheat | until the |
Control | to the | baking | Signal | light | goes off |
|
temperature | you want. |
|
|
|
|
Put food in the oven. Oven
rock. walls and door will be hot
During baking, the elements will turn on and off to help keep the oven temperature
at the setting. The Signal Light will turn on and off with the elements.
The top element helps heat during baking, but does not turn red.
When baking is done, turn both knobs to OFF.
ADJUSTING THE OVEN TEMPERATURE CONTROL
Does your new oven seem to be hotter or colder than your old oven at the
same settings? The temperature setting in your old oven may have changed gradually over the years. The accurate setting of your new oven can seem differ-
ent. If you think the oven temperature needs adjusting, follow these steps:
Locking Screw
1.Pull the Oven Tempera- ture Control straight off.
3.To lower the temperature, move black part of knob closer to LO. Each notch equals about 10 F (5 C].
2.Loosen the locking
screw; NOTICE position of notches.
4.To raise the temperature, move black part of knob closer to HI. Each notch equals about IO’F (5 C).
Tighten the locking screw. Replace | the knob. | 25 |
|
|