Using Your Range

Continued

Thestoragedrawer

The storage drawer is for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti-tip bracket(s). Use care when handling the drawer.

Drawer slide rail -

Literature

Removing the storage drawer:

1. Empty drawer of any pots and pans before removing drawer. Pull drawer straight out to the first stop. Lift front and pull out to the second stop.

2. Lift back slightly and slide drawer all the way out.

Replacing the storage drawer:

1. Fit ends of drawer slide rails into the drawer guides on both sides of opening.

2. Lift drawer front and push in until metal stops on drawer slide rails clear white stops on drawer guides. Lift drawer front again to clear second stop and slide drawer closed.

Use and care guide storage Store this booklet, along with your Cooking Guide and sales slip in the Literature Pat, inside the storage drawer.

To verify that the anti-tip bracket(s) is engaged:

l Remove storage drawer.

l Look to see if the anti-tip bracket(s) is attached to floor with screws.

l Make sure rear leveling leg(s) is positioned under bracket(s).

l See “Important Safety Instructions” on page 3 and Installation Instructions for further details.

NOTE: The range will not tip during normal use. Tipping can occur if excessive force or weight is applied to open door without anti-tip bracket(s) properly secured.

20

Page 20
Image 20
Whirlpool RS373PXW manual Thestoragedrawer, Using Your Range