Whirlpool RS373PXW manual Solid elementsurfaceunits

Solid elementsurfaceunits

Burn and Electrical Shock Hazard

Make sure all surface units are OFF and cool before cleaning them. Failure to do so can result in burns or electrical shock.

1.For best results, wipe off surface units with a damp soft cloth and soapy water after each use. Remove burned-on food with a soap-filled scouring pad. The red spot in the center of the surface unit will gradually wash off. This is normal and will not affect the operation of the surface unit.

2.IMPORTANT: Dry the element completely after cleaning. Turn on the element for a few minutes to thoroughly dry. After the element has cooled, use a paper towel to apply a thin coat of salt-free oil to the surface units to season and restore the finish. Wipe excess oil off stainless steel trim rings. Then heat 3-5 minutes, Some smoking may occur; this is normal. If surface units have dark spots caused by grease and food, the oil treatment will improve their appearance but not eliminate the spots.

NOTE: Optional Electrol” dressing can be applied to the surface units to improve their appearance.

23